FuriousFPV 2.4GHz 800mW VTX Long Range Stealth

Availability:

Out of stock


Compare

FuriousFPV 2.4GHz 800mW VTx
Push your FPV boundaries far beyond the horizons with the all new long range Furious FPV 2.4GHz VTx – the ultimate long range FPV solution.

£49.99

Out of stock

Building upon the massive success of previous 5.8GHz systems, Furious FPV steps into the realm of 2.4GHz, offering a multi power VTx with a selectable race ready 10mW to massive 800mW output power for extreme range FPV flight that only 2.4GHz can provide.

Offering ultra clear video reception with excellent signal penetration, the 2.4GHz VTx provides a host of capabilities with (16) channels of 2.4GHz frequencies to choose from. Further this with a light weight, compact layout that incorporates a metal shield for video clarity protection, the Furious FPV 2.4GHz VTx offers a perfect FPV solution for pilots in search of long range flight.

Featuring a wide voltage input of 7.4V – 25.2V, built-in BEC 5V@2A with LC filter with an RGB LED board to provide channel & power output feedback, the Furious 2.4GHz VTx is a multi-channel power house that offers maximum flexibility when it comes to your FPV application.

Designed for long range pilots in mind, the Furious FPV 2.4GHz VTx is the ultimate extreme range VTx, offering immense capability and functionality in a light weight, compact layout. A perfect fit for a myriad of FPV machines, the 2.4GHz VTx is ready and waiting to push your FPV range to the horizons & beyond.

Transmission Frequency: 2.4GHz

  • Selectable Output Power: 10mW/25mW/ 200mW/ 500mW/ 800mW
  • Available Channels: 16
  • Input Voltage: 7.4V – 25.2V (2S – 6S LiPo)
  • BEC: 5V@2A + LC Filter
  • LED Ports: (2) LED Ports for LED Strip Functionality
  • On Board Display: RBG (Red/ Blue/ Green) LED
  • Non support audio
  • RF Connector: MMCX
  • Dimensions: 38.2mm x 24.8mm x 9mm (LxWxH)
  • Weight: 8.5g (antenna excluded)
  • Wire & Connector: High Quality Silicon & GH Connector
  • Shield: Easy to Mount Metal Protection Shield
  • VTx Control: Uses Furious FPV Protocol to Control via FC (available via latter firmware update)

Unlike 5.8GHz systems, 2.4GHz maximizes range far beyond the reach of traditional 5.8GHz systems with less video interference or sensitivity. Offering greater video signal penetration, 2.4GHz offers excellent video quality & range for maximum levels of FPV flight.

FuriousFPV have utilized analog signal technology, which must be time travel compared to when Marconi started working on it in 1894. This gives this 2.4GHz VTx no video latency and a smooth, crisp video signal optimized for the very edge FPV flight.

Furious have incorporated the ability to select between 10mW, 25mW, 200mW, 500mW and 800mW output power.  Putting you in control of your range, allowing the perfect amount of output power based upon your distance needs.

Offering 16 channels of 2.4GHz frequencies to choose from, you can select the channel that optimizes your FPV setup, This also offers the lowest levels of signal noise for true video perfection.

From 2S to 6S LiPo power, the Furious offers the ultimate in voltage freedom, giving you the best chance of not releasing the blue genney and we all know once he’s been released, it              never              works                   again.

Integrated with a 2A/5V BEC. Furious have incorporated a built in LC filter, which aids in video clarity for the optimum video signal for when you’re giving it the beans.

Utilizing (2) integrated LED ports, the Furious FPV 2.4GHz VTx offers the capability of LED strip functionality, allowing you to customize the look of your FPV donkey, both day & night.

An RBG LED provides a clear, color based feedback for power output, channel selection and higher level setup control.

At 8.5g the overall weight is in part thanks to the ultra small board layout, this VTx can be mounted to just about any FPV Teddy Bear without affecting performance or power – a perfect FPV design. (Ah you got to love the Chinese, i had to leave that typical statement in. Not the Teddy Bear, that was me “a perfect FPV design”)

Shipping with the latest firmware and offering full control via your FC offering ultimate levels and ease of access to functionality & setup.

Download user manual here:  Manual_Stealth_Long_Range_2.4_GHz

*Using with antenna 2.4GHz: Circular Antenna RHCP 2.4 GHz & Circular Antenna LHCP 2.4 GHz

SKU: 136620 Category: Tags: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “FuriousFPV 2.4GHz 800mW VTX Long Range Stealth”

There are no reviews yet.

You may also like…